The main feature of our wheels for 3D printers and other projects is unrivaled ease of movement. This became possible with the use of high quality bearings from Japanese manufacturers, made according to ABEC5 (Class-5 / P5) standards.
Bearings of the EMQ (Electric Motor Quality) design are distinguished by their minimum rotation resistance and no pronounced backlash. So our wheels require minimal effort to set them in motion. This minimizes stress on motors, belts, idler rollers and significantly reduces inertia. The quality of our products will allow your projects to run flawlessly at the highest speed with the highest quality and repeatability.
In all other respects, our wheels fully comply with the OpenBuilds drawings and are manufactured with high precision.
This design incorporates OpenBuilds, LLC design work shared Open Source under the CC BY-SA 4.0 License.
Manufacturer: A7LAB.XYZ (Ukraine)
Material of wheel: PC (polycarbonate)
Recommended lubricant: PC – silicone only
Note: сontact of polycarbonate with greases and alcohol-containing substances is not allowed.
Rockwell hardness: PC - M75
Compression strength: PC - 86MPA
ID: 15.99mm +/- 0.010mm
ID Bearing: 5mm
We’re use original stainless steel precision shims 5*10*1 for reduce wear and prevents wheels binding. Precision shims are a very important part of the wheel and create the perfect fill and alignment in our Speedy Wheels.
Bearing type: 625 2RS / R-1650HH
Quality standard: P5 (Class 5, ABEC5)
Bearing brands: NMB (Minebea Mitsumi, Japan); UBC (IKO Nippon Thompson, Japan); PFI (USA).
Bearing type: EMQ (low noise level).
RPM rating 40,000-45,000
Dynamic load rating Cr: 1750-1860 N
Static load rating Cor: 730-750 N
Material: Chrome Steel SAE-52100
Warranty period (bearing only): 18 months from the date of purchase or within 50,000 km, whichever is sooner.
Bearing boot color may differ from photos. We reserve the right to take other brands of bearings at our discretion without loss of quality for customer.